Hubs

Zipp's ZM2 hubset delivers dependable precision performance to the gnarliest trail. - Engineered in Germany with better seal design for improved durability - Compatible with e-mountain bikes - Spoke Count: 32H - Boost only - 6-bolt brake interface

Zipp's ZM2 hubset delivers dependable precision performance to the gnarliest trail. This German-engineered hubset features 12 pawls and 132 points of engagement for a quicker response. The hub's improved seal design means better durability on rough terrain. The genius of the ZM2 hub is how we achieved quicker engagement. This hub system works with 12 pawls, in 4 groups of 3, on a 33-tooth ratchet ring. The 33 teeth make the ring strong with pickup that's reliable and consistent. The 4 groups of 3 pawls are staggered, meaning there are always 3 pawls engaging at any time, which boosts durability. The ZM2 also has higher load transmission capability. The hub is capable of being used on electric mountain bikes. - Engineered in Germany with better seal design for improved durability - 132 points of engagement - Designed with 12 pawls (4 groups of 3) for quick engagement - Strong ratchet ring maximizes load capacity - Compatible with e-mountain bikes - Spoke Count: 32h - Boost only - 6-bolt brake interface

- Six pawls are offset to work in two groups of three, with 66 points of engagement e-bike certified - Center locking rotor interface (lock ring included) - Lifetime Warranty - Position: Front - Axle Type: 12mm TA - Hub Spacing: 100mm - Hub Drilling: 20H - Rotor Mount: Center Lock - Hub Spoke Type: J-bend - Weight: 97g

- Six pawls are offset to work in two groups of three, with 66 points of engagement - e-bike certified - Center locking rotor interface (lock ring included) - Lifetime Warranty

In designing an upgraded hubset for our pro-proven Firecrest wheel lineup, we turned to our engineering colleagues at SRAM's development center in Schweinfurt, Germany. The result is the ZR1 hubsets for disc wheels. This hubset features better seal design for improved durability and quicker response with 66 points of engagement. Our engineers spent more than two years developing the ZR1. Proving the durability of the hubset included more than 58,500km of test riding, part of 3,222 hours of total testing. The ZR1 features key technology from Zipp's Cognition hubs. The seal design is the same as the Cognition, with a large dust cap at the base of the driver body and better bearing seals for more protection. The bearing size also is the same as the Cognition, although the Cognition uses a premium bearing. The six pawls are offset to work in two groups of three pawls. There are always three pawls engaging. This design creates a quick engagement feel, with 66 points of engagement. The driver body is designed so pawls stay in place for disassembly to make service convenient. Zipp hubs are designed to use J-bend spokes, the most popular type of spokes today. J-Bend, widely available, are easier to replace. - Better sealing, increasing durability over previous hub model - Quick engagement for a responsive ride - Lightweight - Same bearing size as premium-level Cognition hub - e-bike certified - Disc brake hub with Center Lock rotor interface. The lock ring is included

The 3.30/3.30Ti 9mm Thru Axle Hub Kit makes Stan's 3.30 front hubs 9mm through axle compatible. Installation is easy—just pull the old ones off and put the new ones on.

The 3.30HD 9mm Thru Hub Kit makes Stan's 3.30HD front hubs 9mm through axle compatible. Installation is easy—just pull the old ones off and put the new ones on.

Internal O-rings, a grease sleeve, and high-quality cup and cone bearings lend this 105-level hub high durability and smooth rolling. - Internal O-rings and grease sleeve - High quality, sealed Cup & Cone Bearing - High durability and smooth rolling for sustained performance

Shimano's Alfine SG-S7001 Disc Brake Internally Geared Hub delivers an impressive gear range, spread across 11 speeds, all with the reliability and low maintenance you can only get with an internally geared hub. - Center Lock Disc Rotor Compatible

With simple setup and reliable trail performance, the Shimano Deore XT 8100 front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with Center Lock spline mount and lock ring - Tool-less 15mm thru axle system optimizes rigidity and weight - Simple setup and reliable trail performance

Shimano's Track Dura-Ace Hi-Flange Hubs build up into stiff, fast spinning wheels that want to sprint right out off the line. Stainless steel bearings and Borozon treated bearing races minimize drag for maximum efficiency and speed. You get your choice of single or double-sided cog threading. - Weight: 313 grams

- Series : DEORE XT - Disc Rotor Mount : Center Lock Disc - Axle Type : 12mm thru-axle - Axle : 12x148mm - Contact Sealing : Labyrinth & Contact - Spoke Holes : 32H

Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM's 900 hubs are ready for the challenge. On the inside, their smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike. - Fully convertible with tool-free end caps - 24, 28 or 32 spoke holes

Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM'S 900 hubs are ready for the challenge. On the inside, the smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike. - Versatile driver body can accept ROAD or MTB drivetrain, full spline or XD cassettes - Fully convertible with tool-free end caps - BOOST variants - 24, 28 or 32 spoke holes

Whether the goal is a finish line, epic adventure or simply getting back home again, our new 900 hubs are ready for the challenge. On the inside, our smooth and durable DOUBLE TIME drive mechanism ensures rapid lightning-fast engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike. - Includes Quick Release & 12x142mm Through AxleCaps - Fully convertible with tool free end caps - DOUBLE TIME mechanism offers smooth,quick and durable engagement - Versatile driver body can accept ROAD or MTB drivetrain, full spline or XD cassettes - Axle type: Conversion Caps included - Spoke holes: 24 - Brake compatibility: Disc (6-bolt) - Driver Mechanism: Double Time - Four Pawl - Axle material: Tapered aluminum - Driver body material: Aluminum - Hub shell: Aluminum - Seeker angled flanges - Oversized body

Optimized hub geometry to balance spoke tension - Angled flanges create a more direct path for the spoke and nipple - Tall flanges maximize torsional stiffness - The G3 hub shell is the ideal foundation for incredibly stiff, responsive, and reliable wheels. Featuring 6 Lock, an improved six-bolt design that gives versatility to run Center Lock. - A new and enhanced six-bolt design featuring stainless steel threads - No lock ring, only T25 Torx hardware - Easily converts from six-bolt to Center Lock **** 6 Lock is only recommended for use on P321 G3 Hubs **** **** NOTE: THE TORQUE SPEC FOR THE 6 LOCK ROTOR BOLTS IS 3.5Nm ****

Optimized hub geometry to balance spoke tension - Angled flanges create a more direct path for the spoke and nipple - Tall flanges maximize torsional stiffness - The G3 hub shell is the ideal foundation for incredibly stiff, responsive, and reliable wheels. Featuring 6 Lock, an improved six-bolt design that gives versatility to run Center Lock. - A new and enhanced six-bolt design featuring stainless steel threads - No lock ring, only T25 Torx hardware - Easily converts from six-bolt to Center Lock **** 6 Lock is only recommended for use on P321 G3 Hubs **** **** NOTE: THE TORQUE SPEC FOR THE 6 LOCK ROTOR BOLTS IS 3.5Nm ****

Instant, Rock-Solid Engagement - 1.25° / 288 Points of Engagement (POE) - Eight 3-step pawls phased in teams of two - 72-tooth drive ring with oversized teeth Magnetic Glide Technology - Magnetically actuated pawls minimize drag while coasting - Fewer moving parts - No easy-to-lose springs - Less drag. Less maintenance. Drive Ring Seal System - New low-drag, light-contact rubber seal - Aluminum dust shield - Improved two piece seal system keeps oil in and contaminants out. 6-Lock Brake Standard - The new and enhanced version of six bolt with the versatility to run Center Lock - The rotor is fastened to the 6-Lock brake mount using six T25 Torx bolts; no lock ring required. **** 6 Lock is only recommended for use on P321 G3 Hubs **** **** NOTE: THE TORQUE SPEC FOR THE 6 LOCK ROTOR BOLTS IS 3.5Nm ****

Instant, Rock-Solid Engagement - 1.25° / 288 Points of Engagement (POE) - Eight 3-step pawls phased in teams of two - 72-tooth drive ring with oversized teeth Magnetic Glide Technology - Magnetically actuated pawls minimize drag while coasting - Fewer moving parts - No easy-to-lose springs - Less drag. Less maintenance. Drive Ring Seal System - New low-drag, light-contact rubber seal - Aluminum dust shield - Improved two piece seal system keeps oil in and contaminants out. 6-Lock Brake Standard - The new and enhanced version of six bolt with the versatility to run Center Lock - The rotor is fastened to the 6-Lock brake mount using six T25 Torx bolts; no lock ring required. **** 6 Lock is only recommended for use on P321 G3 Hubs **** **** NOTE: THE TORQUE SPEC FOR THE 6 LOCK ROTOR BOLTS IS 3.5Nm ****

Instant, Rock-Solid Engagement - 1.25° / 288 Points of Engagement (POE) - Eight 3-step pawls phased in teams of two - 72-tooth drive ring with oversized teeth Magnetic Glide Technology - Magnetically actuated pawls minimize drag while coasting - Fewer moving parts - No easy-to-lose springs - Less drag. Less maintenance. Drive Ring Seal System - New low-drag, light-contact rubber seal - Aluminum dust shield - Improved two-piece seal system keeps oil in and contaminants out. 6-Lock Brake Standard - The new and enhanced version of six bolt with the versatility to run Center Lock - The rotor is fastened to the 6-Lock brake mount using six T25 Torx bolts; no lock ring required. **** 6 Lock is only recommended for use on P321 G3 Hubs **** **** NOTE: THE TORQUE SPEC FOR THE 6 LOCK ROTOR BOLTS IS 3.5Nm ****

Instant, Rock-Solid Engagement - 1.25° / 288 Points of Engagement (POE) - Eight 3-step pawls phased in teams of two - 72-tooth drive ring with oversized teeth Magnetic Glide Technology - Magnetically actuated pawls minimize drag while coasting - Fewer moving parts - No easy-to-lose springs - Less drag. Less maintenance. Drive Ring Seal System - New low-drag, light-contact rubber seal - Aluminum dust shield - Improved two-piece seal system keeps oil in and contaminants out. 6-Lock Brake Standard - The new and enhanced version of six bolt with the versatility to run Center Lock - The rotor is fastened to the 6-Lock brake mount using six T25 Torx bolts; no lock ring required. **** 6 Lock is only recommended for use on P321 G3 Hubs **** **** NOTE: THE TORQUE SPEC FOR THE 6 LOCK ROTOR BOLTS IS 3.5Nm ****

Instant, Rock-Solid Engagement - 1.25° / 288 Points of Engagement (POE) - Eight 3-step pawls phased in teams of two - 72-tooth drive ring with oversized teeth Magnetic Glide Technology - Magnetically actuated pawls minimize drag while coasting - Fewer moving parts - No easy-to-lose springs - Less drag. Less maintenance. Drive Ring Seal System - New low-drag, light-contact rubber seal - Aluminum dust shield - Improved two piece seal system keeps oil in and contaminants out. 6-Lock Brake Standard - The new and enhanced version of six bolt with the versatility to run Center Lock - The rotor is fastened to the 6-Lock brake mount using six T25 Torx bolts; no lock ring required. **** 6 Lock is only recommended for use on P321 G3 Hubs **** **** NOTE: THE TORQUE SPEC FOR THE 6 LOCK ROTOR BOLTS IS 3.5Nm ****

These hubs are machined from three inch round bars of 6061 aluminum. - High flanges builds a stiff, strong wheel - The axle is ground from 7075 aluminum, which has a great strength to weight ratio - Adjustable precision bearings - Knurled stainless steel outer locknut faces - 216g (inc bolts) Dimensions: Axle Spacing: 100mm Flange Diameter: 65mm Center to Flange: 32.5mm

MX801 Classic are the legacy of the renown Mavic hubs from the past (501, 571…), featuring Mavic exclusive hub technologies MX801 Classic hubs are again available to MTB wheel builders The precisely CNC machined hub shells optimize spoke dish and spoke alignment for a strong and durable builds. MX801 Classic hubs come with 28- or 32-holes drilling option. The ID360 ratchet style freewheel system offers quick engagement and perfect torque transfer, with low drag and ease of maintenance. ID360 is fully compatible with any freewheel standard. Large sealed cartridge bearings (2 front, 4 rear) offers C3 internal clearance for durable and smooth operation. Our QRM Auto preload system guarantees smoothness and perfect play without any intervention. Designed, engineered and tested in France, CNC machined in Europe. Main features: For a strong build up - Optimized flange spacing and diameter ensures perfect spoke tension and wheel geometry Instant Drive 360 freewheel system - Quick engagement, high durability, low maintenance and ease of use. Compatible with 10/11spd Shimano, 12 Speed MicroSpline, Sram XD Classic lacing - The classic version is available in 28 and 32 drilling options (front and rear) and is available CL or INT 6-bolts disc version.

MR801 are the legacy of the renown Mavic hubs from the past (501, 571…). The precisely CNC machined hub shells optimize spoke dish and spoke alignment for stable, stiff and durable builds. Large sealed cartridge bearings (2 front, 4 rear) offers C3 internal clearance for durable and smooth operation. Our QRM Auto preload system guarantees smoothness and perfect play without any intervention. The ID360 ratchet style freewheel system offers just 9° of engagement and perfect torque transfer, with low drag and sexy sound when freewheeling. The disc version is available in 24, 28 and 32 drilling options (front and rear). It’s compatible with 12mm through axle and can easily convert to quick release. The rim brake version is available in 20, 24 and 28 holes for the front and 24, 28 and 32 holes the rear. Designed, engineered and tested in France, handcrafted in Europe.

MX801 Classic are the legacy of the renown Mavic hubs from the past (501, 571…), featuring Mavic exclusive hub technologies MX801 Classic hubs are again available to MTB wheel builders. The precisely CNC machined hub shells optimize spoke dish and spoke alignment for a strong and durable builds. MX801 Classic hubs come with 28- or 32-holes drilling option. The ID360 ratchet style freewheel system offers quick engagement and perfect torque transfer, with low drag and ease of maintenance. ID360 is fully compatible with any freewheel standard. Large sealed cartridge bearings (2 front, 4 rear) offers C3 internal clearance for durable and smooth operation. Our QRM Auto preload system guarantees smoothness and perfect play without any intervention. Designed, engineered and tested in France, CNC machined in Europe.

Industry Nine Hydra Classic mountain hubs are loaded with features every rider will appreciate such as revolutionary 0.52° engagement, generously low weights and an intuitive layout that can be serviced without any proprietary tools. - From turning and milling bar stock 7075-T6 aluminum for shells, axles and encaps, wire EDM cutting A2 tool steel for pawls and driverings, to in-house anodization lab, every step of design, engineering, manufacturing and assembly is done to exacting standards in Asheville, NC - 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control - Classic j-bend spoke interface - Steel cartridge bearings are durable - Easily serviced with no proprietary tools; Designed to keep you in the saddle and out of the service queue

Industry Nine Hydra Classic hubs are the heart of your wheelset, everything revolves around them, literally. Every Classic Hydra hub is made start to finish in Asheville, NC. From turning and milling bar stock 7075-T6 aluminum for shells, axles and encaps, wire EDM cutting A2 tool steel for pawls and driverings, to in-house anodization lab, every step of design, engineering, manufacturing and assembly is done to exacting standards. - 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control - 6 pawl, 6 phase - 115 tooth drivering - Easily serviced with no proprietary tools. Designed to keep you in the saddle and out of the service queue - Classic j-bend spoke interface - Steel cartridge bearings are durable

Industry Nine Hydra Classic hubs are the heart of your wheelset, everything revolves around them, literally. Every Classic Hydra hub is made start to finish in Asheville, NC. From turning and milling bar stock 7075-T6 aluminum for shells, axles and encaps, wire EDM cutting A2 tool steel for pawls and driverings, to in-house anodization lab, every step of design, engineering, manufacturing and assembly is done to exacting standards. - 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control - 6 pawl, 6 phase - 115 tooth drivering - Easily serviced with no proprietary tools. Designed to keep you in the saddle and out of the service queue - Classic j-bend spoke interface - Steel cartridge bearings are durable

The pinnacle among the hubs–Ratchet EXP united with SINC ceramic bearings. The premium 180 hub convinces with its sophisticated Ratchet EXP technology, giving the hub extra lightness, stiffness, and precision along with easy, no-tool maintenance. Furthermore, assembled with the low-friction SINC ceramic bearings, the hub performs efficiently and brings your power directly to the road. The hub is available for straight pull spokes only.