Parts & Accessories

The MIK Carrier Plate is ideal for cyclists who are looking to upgrade their frame to accommodate the MIK system. This carrier plate allows you to attach any accessory fitted with an MIK adapter to your luggage carrier in as little as one second. You’ve a wide range of accessories to consider, including panniers and baskets with ample storage. Once fitted with MIK system components, it’s as simple as clicking your preferred storage item or accessory into place. Please note, bikes already fitted with integrated MIK systems including carrier plate needn’t worry about upgrading their bicycle with this accessory. This MIK Carrier Plate is suitable for luggage racks with a width of 100-170mm. Features: - The MIK Carrier Plate is suitable for bicycle baskets and panniers from Basil. - Attach at the rear luggage carrier of conventional and electric bike frames. - The MIK Carrier Plate is designed for use with accessories that have been fitted with MIK Adapter Plates.

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm - Designed to maximize bottle capacity on small frame bikes and dual suspension frames

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Three slots for additional adjustments over the B-RAD 2 base - Compatible with triple bottle mounts on forks or frames, use neoprene pad and zip tie for use with standard bottle cage mounts

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Long, four-slotted mount allows two, smaller bottles to be mounted in-line - Compatible with triple bottle mounts on forks or frames, use included neoprene pad and zip tie for use with standard bottle cage mounts

The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options. - Mounts to bottle bosses, or to the B-Rad base for additional carrying options - Main strap is 50mm wide and holds loads 75-120mm diameter (3 - 4.75 inches) - Cradle strap is 40mm wide and 350mm long for supporting loads

B-RAD Bottle Mounts allow for cargo customization and cargo optimization. They are designed to work in tandem with B-RAD Base mounts to keep cargo on the bike and off the back. - Compatible with any bike frame that has 2 standard 64mm spacing bottle cage mounts (most modern frames) - 6061-T6 aluminum brackets, stainless hardware - Weight (no hardware) – 20g - Maximum load 1700g - Designed to carry two bottles or accessories off of one B-RAD base

B-RAD Half Bottle Mounts allow for cargo customization and cargo optimization. Designed to work in tandem with B-RAD Base, the Half-Bottle Adaptor moves the bottle over about half a bottle radius to make it easier to access. The Accessory strap mounts can be mounted to the other side providing a mounting point for additional items. - Mounts to the B-Rad base mount (not included

The Wolf Tooth Cargo Strap is a versitle way to secure and repair almost anything. It is quick, secure, and durable with the aluminum buckle. Pair with the Wolf Tooth Cargo Cage or use it on just about anything you need to hold in place or bundle. Tech Specs: - Weight: 28.5g - Dimensions: 20" long strap (21" with buckle); .75" wide - Material: aluminum buckle

The Topeak Backloader Wishbone attaches to the saddle, and provides anti-sway for large saddle bags. In addition, the Wishbone has bottle cage mounts to allow 2 additional bottles to be carried. A handy accessory to add to your bikepacking repertoire that keeps the backloader or any large seat bag from swaying back and forth. - Fits rear bags 18cm/7" wide - Bottle cage bolts included, max load 4.4lbs - Mounts to any standard seat rails. Not compatible with monorail or spring/bumper saddles

Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.

QuickClick mount for racing type saddles. Works with all Topeak Wedge Bags. - Material : Injected Nylon - Weight: 30g / 1.06 oz

Adapter for mounting the Topeak MTX rear basket to any MTX QuickTrack compatible rack.

Omni QuickTrack Adapter attaches to a standard rear rack or Racktime* system platform allowing the use of popular Topeak TrunkBags and rear baskets. Adjustable mounting brackets fit rear rack widths from 90mm to 120mm with 10mm to 12mm rack tube dimensions. - Attachments: Rear rack deck - Material: Engineering grade polymer - Max Load: Limited to rack max loading rating - Size: 32 x 9.4 x 6.1cm - Weight: 230g / 8.11oz Compatibility - Fits rear rack without top plate and spring clip, - Rear rack width 90mm - 120mm, - Rack tubes, 10mm to 12mm diameter - Compatible with Topeak MTX / RX TrunkBags and MTX rear baskets *Racktime is a registered trademark of tubus carrier systems GmbH.

Take your bike adventures even further with a versatile mount cage to pack larger gear on your bike. The included tie-down straps provide the ability to carry a DryBag, sleeping bag/pad, stuff sack, or any round shaped gear on your bike frame or fork with bottle bosses. A four-hole mount design offers height adjustment of your load for better balance. VersaMount clamps also provide easy installation and flexible mounting options. - Fits tubes 20-60mm. - Engineering grade polymer - 64 mm mounting height adjustable - Weight: 128g - Max load: 3kg / 6.61lb - Dimensions: 22 x 12 x 7cm / 8.7 x 4.7 x 2.8-inches

QuickClick mount for spring-style saddles. Works with all Topeak Wedge Bags. - Material: Injected nylon / Stainless steel - Weight: 50g / 1.76oz

Thule's Pack n' Pedal Side Frames mount quickly and easily to the sides of their Pack 'n Pedal Tour Rack (sold separately). They allow you to use any model of pannier for increased luggage capacity and a lower center of gravity.

Thule's Pack 'n Pedal Rail Extender Kit increases rider heel clearance by moving your panniers further back. The extenders can be used on either a front- or rear-mounted Thule Tour Rack (sold separately).

The Bungee Booster is a quick and easy way to add some extra capacity (as well as some color) to any of our bags with parallel webbing daisy chains. Just lace the durable elastic cord through the loops of the daisy chain and slip the cord lock on for adjustability. Cut to length to fit whatever bag you choose.

The Bungee Booster is a quick and easy way to add some extra capacity (as well as some color) to any of our bags with parallel webbing daisy chains. Just lace the durable elastic cord through the loops of the daisy chain and slip the cord lock on for adjustability. Cut to length to fit whatever bag you choose.

Designed to secure our Every Day Caddy to your saddle, the 15" Swift Strap is a durable nylon buckle strap. Keep one or two extra in your tool kit for last minute repairs or to lash modular gear to your setup. Dimensions: - Measurements: 15" long x 3/4" - Weight: 0.8 oz Materials: - Nylon buckle - Polyurethane

Keep your gear secure and the stoke high with these slip-resistant, super-bomber polyurethane 9" Swift Straps. Not only are they perfect for lashing your Swift bags to your handlebars, saddle, or top tube, but also work as an on-the-go attachment straps for layers you shed or goodies you pick up along the way. With the Swift Strap Set you’ll never think twice about your bags or accessories going OTB, even on the roughest of terrain. Dimensions: - Measurements: 9" long x 1/2" - Weight: 0.3 oz Materials: - Nylon buckle - Polyurethane

Our smallest strap ideal for lighter objects. Secure anything to a bicycle without scratches with these flat cargo bicycle straps - no hooks cargo straps! 2 straps per package.

For all Bike-Tourer models without magnetic closure. Need to replace a lost or broken buckle? DETAILS: - 1 plastic buckle (male and female ends, 40 mm, black)

Replacement Buckle 50 mm for Messenger Bags, Velocity, and other Backpacks.

Lockable adapter for mounting Travel-Biker or Trunk-Bag (with ORTLIEB-Adapter 06/2004 - 2015) on a second bike. Simultaneous use of bike panniers with QL1 or QL2/QL2.1 on the side is possible. Not suitable for Rack-Lock products.

- 2-liter hydration pack - Removable tube - Bite valve with protective cap - Sealing ring for tube portal;attachment hooks - Thermal protection pocket

Holder for hiking sticks, poles, skateboards, snowboards, snowshoes and skis (e.g. for A-frame and diagonal ski portage); ideal for Atrack and Gear-Pack Note: Additional Gear-Pack Compression-Straps (R10105) are necessary for use with the Gear-Pack.

If one of the plugs of your Seat-Pack is defective, you can easily replace it. For Bike packing Seat-Pack. - 1x plug, 1x plug with webbing safety device, black

For all models with the QL1 or QL2 system. Attach the 4 foam guards to your elliptical or semi-elliptical brackets to minimize wear to your bike rack. DETAILS: - 4 abrasion guards

The perfect solution for safely transporting your gear: Our Cargo Straps! With these straps, you can effortlessly attach your duffles to cargo bikes with platforms or cargo racks. The straps offer quick and adjustable length settings, allowing you to securely and firmly fasten your load, no matter how large or small it is. But that's not all – our Cargo Straps are versatile. You can also use them without bags to secure larger items with a strap length of up to 320 cm. This means you can easily secure everything from bulky cargo to extensive shopping with a maximum load capacity of up to 30 kg. Our straps are equipped with special connectors that are always compatible with each other. This means you can attach the straps to any bag with at least four 25 mm Daisy Chains. So you're always well-equipped for all your transportation needs, no matter where your adventures take you. And if you don't need to transport loads at the moment, the straps can simply stay on the bike without causing any inconvenience.